SA10 6000 PSI HIGH PRESSURE COMPRESSOR

  • Model: E4-10-A6

Please Choose:

New Quote




The SA10 compressor block is 4 stage, air cooled, splash lubricated, has inter coolers and after
cooler, relief valves on all stages, and a multi-blade flywheel fan to provide high velocity
cooling over the compressor. Standard equipment includes an auto-drain system, inner stage
gauges, hour meter, high pressure shut down, carbon-monoxide visual indicator and a fully
enclosed, sound dampened cabinet with gauge panel.

The minimum requirement for single-phase operation is a 50 Amp, 230 Volt connection.
The minimum requirement for three-phase operation is a 40 Amp, 230 or 208 Volt connection.

The filtration system consists of one chamber rated at 24,000 cu. ft. of air capacity at 80
degrees. The system uses a dryer bed to remove water in excess of dew point –65 degrees.
(NFPA 1500 standard) Activated charcoal and a carbon monoxide catalyst remove remaining
contaminants to provide CGA Grade E breathing air. Additional filtration capacity can
added for high volume users.

14 CFM
6000 PSI
10 HP electric motor
Single or three phase electric
66.75in h x 23in d x 36in w
Weight: 700 lbs.

This product was added to our catalog on Friday 30 March, 2018.

Copyright © 2018 Star Air Systems