E4-7.5-A6 - [Breathing Air Compressor] : Star Air Systems : Breathing Air Compressor System

E4-7.5-A6

  • Model: E4-7.5-A6
  • 100 Units in Stock

Please Choose:

New Quote




10 CFM
6000 PSI
7.5 HP electric motor
Single or three phase electric
66.75in h x 23in d x 36in w
Weight: ~600 lbs. approx.

BREATHING AIR COMPRESSOR SPECIFICATIONS
The compressor block is 4 stage, air cooled, splash lubricated, has inter coolers and after
cooler, relief valves on all stages, and a multi-blade flywheel fan to provide high velocity
cooling over the compressor. Standard equipment includes an auto-drain system, inner stage
gauges, hour meter, high pressure shut down, carbon-monoxide visual indicator and a fully
enclosed, sound dampened cabinet with gauge panel.

PURIFICATION
The filtration system consists of one chamber rated at 24,000 cu. ft. of air capacity at 80
degrees. The system uses a dryer bed to remove water in excess of dew point ā€“65 degrees.
(NFPA 1500 standard) Activated charcoal and a carbon monoxide catalyst remove remaining
contaminants to provide CGA Grade ā€œEā€ breathing air. Additional filtration capacity can
added for high volume users.

ELECTRICAL REQUIREMENTS
The minimum requirement for single-phase operation is a 40 Amp, 230 Volt connection.
The minimum requirement for three-phase operation is a 30 Amp, 230 or 208 Volt connection.

This product was added to our catalog on Friday 14 February, 2014.

Copyright © 2018 Star Air Systems